manualshive.com logo in svg

G-Technology G SPEED STUDIO XL, Product Manual, Page: 38 / 119

Share
Download
G-Technology G SPEED STUDIO XL Product Manual Download Page 38

Configuring G-SPEED Studio XL

G SPEED

STUDIO 

XL

with Thunderbolt™

p. 38

Enclosure information includes:

•  Enclosure ID
•  Enclosure Warning Temperature Threshold
•  Controller Warning Temperature Threshold
•  SEP Firmware Version
•  Max Number of Controllers
•  Max Number of Fans
•  Max Number of Power Supply Units
•  Enclosure Type
•  Enclosure Critical Temperature Threshold
•  Controller Critical Temperature Threshold
•  Max Number of Physical Drive Slots
•  Max Number of Temperature Sensors
•  Max Number of Voltage Sensors

Click the 

X

 icon to close the information panel. 

Viewing Temperature Sensor Information

To view the status of the temperature sensor:

1.  Click the Dashboard icon, then click the Temperature link.
2.  Scroll down until you see Temperature Sensors. 

Temperature Sensors information includes:

•  ID
•  Status (Normal, Warning or Critical icon)
•  Location (Controller or Backplane)
•  Healthy Threshold (Enclosure Warning Temperature Threshold)
•  Current Temperature

Click the 

X

 icon to close the information panel.

Summary of Contents for G SPEED STUDIO XL
























































































































Reviews:

No comments