manualshive.com logo in svg

G-Technology G SPEED STUDIO XL, Product Manual, Page: 21 / 119

Share
Download
G-Technology G SPEED STUDIO XL Product Manual Download Page 21

Configuring G-SPEED Studio XL

G SPEED

STUDIO 

XL

with Thunderbolt™

p. 21

6.  Click Install to begin the installation process.
7.  The G-SPEED Studio Software Utility will install in a few moments. Once complete, a message will 

inform you that the installation was successful. Click Close to complete the installation procedure.

The G-SPEED Studio Software Utility is now available to help manage your G-SPEED Studio XL. Use 
this tool if you need to modify the array configuration, retrieve system information or update the 
enclosure firmware. The utility tool is also useful for monitoring the storage system status as well as 
troubleshooting. For more information on using the G-SPEED Studio XL, including instructions on 
how to use the Wizard menu or configure a different RAID array configuration, see 

Manage With 

G-SPEED Studio Software Utility

.

Summary of Contents for G SPEED STUDIO XL
























































































































Reviews:

No comments