M
CB
3
Installation Manual
Page 42
Custom Setup Menu
Out of Beam Alarm - Enable out of laser beam audible signal
Select On to enable out of laser beam audible
signal. One double beep is emitted when the
receiver does not receive a laser beam strike for
approximately one second.
Select Off to disable out of beam audible signal.
Up/Down Switch - Select Implement (Impl) or Mast (Mast) to Raise / Lower
Select Implement to raise / lower implement.
Select Mast to raise / lower mast (for use with electric mast; currently not available.)
(Depending on software release date, this function may not be available.)
Display Avg - Selects display performance options (Does not affect control)
Selections include
None - No averaging, each strike received is displayed.
Adaptive (Adpt) - Adapts to laser RPM (recommended for
most applications).
Fast - Minor averaging function applied to display
Stable (Stbl) - More averaging function applied to display.
Receiver LEDs - Turns Receiver LED's On or Off
Select On or Off. User preference for the receiver LED's.
2 Strike Avg - Enables 2 strike laser averaging (Affects control)
Select On or Off.
On is used in environments that may cause unstable behavior such as very windy
conditions and working long distances from the laser.
The 2 strike averaging will slow system response. Adjustments to the valve speed or
on-grade deadband may be required to maintain stability.
R/L Override - Enables Raise / Lower switch to override in Auto control
Select On or Off.
When On, the manual raise and lower switch
will override the automatic control. When
released, automatic control will resume.
Custom Setup Menu
< Exit >
Out of Beam Alarm
Up/Down Switch
Display Avg
On
5.7
Technical Setup - Custom
Custom Setup Menu
2 Strike Avg
R/L Override
R/L Ramp
Receiver Facing
