M
CB
3
Installation Manual
Page 7
General Information
General Identification
12 13
14
15
16
17
18
20
19
2.2
12. Rotary Switch - used for factory tests. Default position is 0.
13. DIP Switch - used for installation. Default position is all switch bats down (off).
14. Fuse - 25 amp, auto style.
15. 7-pin connector - optional remote switch.
16. 10-socket connector - hydraulic valve output.
17. 4-pin connector - machine power input.
18. 7-socket connector -
MCR
receiver communication.
19. Beeper with adjustable volume control - rotate to increase or decrease volume. Single beep
is activated when switch command is accepted. Double beep activated when switch command
is not available, incorrect or not accepted.
20. Identification / serial number label / cable function symbols.
Refer to the control box operator's manual (P/N ATI-010884) for detailed operational information.
