M
CB
3
Installation Manual
Page 43
Technical Setup - Custom
Custom Setup Menu
R/L Ramp - Enables Raise / Lower switch to
ramp up to full speed
Select On or Off.
On allows a progressive increase for the
valve to get to the 100% open state in the first
second.
Slope Axis - Selects X or Y Axis for receivers equipped with dual slope sensors.
Y is the default, tilt axis - "side to side" with respect to the receiver's grade display.
X is the plumb axis and would be set for a special application when the receiver would
operate rotated 90 degrees about the vertical axis from its normal orientation - "front to
back" with respect to the receiver's grade display.
(Depending on software release date, this function may not be available)
Receiver Facing
Selection allows for consistent slope directions on the controls for either mounting
option if internal slope sensors are used. Selects orientation of receiver. For
receivers mounted on the front of the machine in front of the operator with LED's
facing back toward the operator, select "Back". For receivers in the back of the
machine behind the operator with LED's facing toward the front, select "Frnt" for
front.
Custom Setup Menu
R/L Ramp
Slope Axis
Receiver Facing
<Exit>
5.7
