Furuno GP-31, Operator'S Manual

Page: 36 / 81

5-2
4. Select a waypoint.
5. Press the [ENT] key.
Own ship’s position becomes starting point
and a dashed line runs between it and the
waypoint selected, which is shown in re-
verse video.
5.3 Setting Route as
Destination
1. Press the [GOTO] key.
2. Select ROUTE?.
3. Press the [ENT] key.
SELECT GOTO ROUTE
NO [NEW?]
LOG EMPTY ROUTE
01 017
→
21 017
02 OSAKA
→
KOBE
03 EIMI
→
KIMI
O4 BOSTON
05 SEATTLE
→
HONOLULU
Figure 5-5 GOTO ROUTE list
4. Select a route.
5. Press the [ENT] key. The following win-
dow appears.
FORWARD?
REVERSE?
Figure 5-6 FORWARD, REVERSE
prompt
6. Select “FORWARD?” or “REVERSE?”,
the order in which to traverse the route
waypoints, and press the [ENT] key.
Intermediate Point 2
(WPT 002)
[ROUTE 01]
KOBE
(Starting point)
Intermediate Point 1
(WPT 001)
Intermediate Point 1
(WPT 003)
OSAKA
(Arrival point)
FORWARD
REVERSE
Figure 5-7 Meaning of forward
and reverse
Current position becomes the starting point.
A dotted line runs between the starting point
and all route waypoints. Next destination
waypoint is shown in reverse video.
The destination waypoint is automatically
switched when the boat enters the arrival
alarm range or the boat passes an imagi-
nary perpendicular line passing through the
center of the destination waypoint. For how
to set the arrival alarm, see page 6-1.
WPT 1
WPT 2
Perpendicular
Waypoint switched
at this point.
WPT 1
WPT 2
Waypoint switched
at this point.
Arrival Alarm Circle
5.4 Canceling Destination
You can cancel destination as follows:
1. Press the [GOTO] key.
2. Select OFF?.
3. Press the [ENT] key.