Furuno GP-31, Operator'S Manual

Page: 34 / 81

4-6
1. Press the [MENU] key once or twice to
display the menu.
2. Select ROUTES and press the [ENT]
key.
3. Select a route from the ROUTES list,
and press the [ENT] key.
4. Place the cursor on the waypoint to skip.
5. Press the [ENT] key.
6. Select “SKIP?” and press the [ENT] key.
X appears to the left of the waypoint.
Figure 4-24 ROUTE screen
7. Press the [MENU] key twice to finish.
To restore a waypoint to a route, select
“SKPoFF ?”at step 6 and press the [ENT]
key.
Changing route comment (name)
When a waypoint- or track-based route is
saved, it is done under the next sequential
route number and the comment (name)
under the starting and final destination
waypoints. You can change the comment
as below. Up to 16 characters may be used.
1. Press the [MENU] key or twice to dis-
play the menu.
2. Select ROUTES and press the [ENT]
key.
3. Select route number and press the
[ENT] key.
4. Select the CMNT field and press the
[ENT] key.
5. Enter comment with the cursor pad and
press the [ENT] key.
6. Press the [MENU] key twice to finish.
4.3 Deleting a Route
1. Press the [MENU] key or twice to dis-
play the menu.
2. Select ERASE and press the [ENT] key.
3. Select “ROUTES?” and press the [ENT]
key.
4. Select the route you want delete. If you
want to delete all routes, select “ALL?.”
5. Press the [ENT] key. You are asked if
you are sure to delete the route.
Figure 4-25 ERASE ROUTE prompt
6. Press the [ENT] key again.
7. Press the [MENU] key twice to finish.