Furuno GP-31, Operator'S Manual

Page: 24 / 81

3-2
e) The cursor is on the date/time field.
Press the [ENT] key.
f) Enter a comment (max. 16 charac-
ters) with the cursor pad (the same
as you did when entering waypoint
name) and press the [ENT] key. To
create a space, select “blank” char-
acter. To remove all characters which
follow the cursor, select the underline.
g) The cursor is on “Exit?.” Press the
[ENT] key.
h) Press the [ENT] key again to finish.
Note: “LOG RT?” function is explained in
the chapter on routes.
Entering a waypoint at own ship’s
position
1. Press the [MARK/MOB] key on any dis-
play. The following window appears.
Figure 3-4 Own ship’s position window
2. If you want to register the waypoint un-
der the number shown, and you do not
need to change mark shape, enter a
comment, or log the waypoint to a route,
press the [ENT] key to finish.
3. To change name, select the NAME field,
press the [ENT] key, select name with
the cursor pad, and press the [ENT] key.
4. To change mark shape, place the cur-
sor under MARK. Press the [ENT] key,
select mark shape with the cursor pad,
and press the [ENT] key again.
5. The cursor is on the date/time field. To
change the date to a comment, press
the [ENT] key, enter a comment with the
cursor pad, and press the [ENT] key
again.
6. Place the cursor on “Exit?.” Press the
[ENT] key to finish.
Entering a waypoint through the
waypoint list
1. Press the [MENU] key once or twice to
display the menu.
2. Select WAYPOINTS.
3. Press the [ENT] key. The following win-
dow appears. Select LIST. (NEAREST
displays waypoints from nearest to fur-
thest; however, waypoints cannot be
entered from this display.)
Figure 3-5 Waypoint list selection window
4. Press the [ENT] key. The WPTS/MRKS
list appears.
Figure 3-6 WPTS/MRKS list
CURSOR: Cursor position when
destination is set with cursor.
MOB: Man overboard position.
START: Starting point when destina-
tion is selected.
5. The cursor is on NEW. Press the [ENT]
key.