Funktel f.airnet D5 Series, Operating Manual, Page: 64 / 160

64
The telephone functions D5 / FC5 Series
Opening the «Call diversion» menu, setting up Call Diversion (cont'd)
Call diversion to a DoIP without a Funktel PBX
The feature for diverting a call to an alternative PBX is only available in DoIP mode and
can be activated on the terminal.
The default setting is Astimax (REST).
The setting should only be changed if the PBX does not support the default call diver-
sion feature but accepts forwarding via SIP and if the function has been activated on the
DECT Controller (as from Version 5.1.2RC3).
Proceed as follows:

Open the main menu by means of the
RIGHT SOFTKEY
[Menu]

Navigate by means of Settings => Device settings to the Call Diversion sub-menu

If your PBX does not support the call diversion function, use the navigation rocker
to select the IWU (SIP) method and confirm with a keystroke on the
RIGHT SOFTKEY
[OK].
Prerequisite: The SIP function is supported by the PBX and is activated on the DECT
Controller (as from Version 5.1.2RC3).