Funktel f.airnet D5 Series, Operating Manual, Page: 120 / 160

120
Alarm triggering and processing D5 / FC5 Series
Alarm triggering and processing
Alarm process in the event of a personal alarm
The triggering of alarm types depends on the programming of the Security
handset and conforms to your requirements for the personal emergency signal
system. It can therefore be the case that only some of the alarm processes de-
scribed below are possible on you handset.
You can have the current programming of your handset displayed, as de-
scribed in the section on “Security Parameters” of the personal emergency sig-
nal functions on Page 128. In case of doubt, make an enquiry to your system
administrator regarding the personal emergency signal system that you have
installed.
Triggering a pushbutton alarm on the handset
Press the pushbutton alarm for as long (approx. 1sec.) as it takes for personal
alarm signalling to take place on the handset. See “Signalling” on Page 108.
ATTENTION
There is no delay time and no pre-alarm in the case of a pushbutton
alarm.
The alarm is sent out immediately!
Triggering will-independent (automatic) personal alarms
on the handset
The attitude and handling of the Security handset trigger the position,
man-down, time-out, tear-off and loss types of will-independent alarms as de-
scribed in the “Will-independent alarms” Section on Page 105.