Funktel f.airnet D5 Series, Operating Manual, Page: 132 / 160

132
Security Parameters D5 / FC5 Series
Technical (Security) signalling
The Security signalling settings for "Technical alarms", "Technical faults" and
"(Technical) instructions" are made separately and independently of each
other. They have the same parameter sets:
Parameters for technical signalling
Parameter
Status settings in the case of the signalling of technical alarms:

PES fault: (yes) / (no)

signals a local technical alarm as soon as polling of the handset by the control
centre of the personal alarm signal system control does not take place.

No DECT: (yes) / (no)

signals a local technical alarm in the event of inadequate DECT radio coverage
(no DECT reception, dead spot)
Further signalling settings:

Volume: mute, soft, loud

effects the aural signalling of the technical alarm, fault, instruction

Tone sequence 1 to 8

selects the tone sequence of the aural signalling

Vibrator (yes) / (no)

signals a technical alarm, fault, instruction by means of vibration

Illumination: (yes) / (no)

signals a technical alarm, fault, instruction by switching on the display illumina-
tion