Funktel f.airnet D5 Series, Operating Manual, Page: 122 / 160

122
Alarm triggering and processing D5 / FC5 Series
Resetting a personal alarm
Control centre resets the personal alarm
 The personnel in the control centre reset the personal alarm completely.
 The personal alarm signalling stops on the handset.
 Your handset is in the general mode (idle display).
ATTENTION
Complete resetting of a personal alarm by the control centre is not
possible in the case of programming of the personal emergency signal
system that conforms to the German Employers' Liability Insurance
Association rules. In this regard, see the requirements and safety reg-
ulations of the Federal German Employer’s Liability Insurance Associ-
ation, in accordance with DGUV Rule 112-139 Use of personal
emergency signal systems (previously: BGR/GUV-R 139).
The control centre issues authorisation to reset
 The personnel in the control centre issue the handset authorisation to reset.
 The handset reacts to the acknowledgement with the additional display
"Alarm ended" until the personal alarm is reset on the handset.
 The personal alarm signalling stops on the handset.
Resetting the personal alarm on the handset after reset authorisation
 If the control centre provides a reset authorisation and the display shows
"Alarm ended", press the LEFT SOFTKEY [End].
 The handset confirms the end of the alarm and reverts to the general
mode.