Funktel f.airnet D5 Series, Operating Manual, Page: 130 / 160

130
Security Parameters D5 / FC5 Series
time-out alarms
NOTE
The delay and pre-alarm times for manual push-button alarms and
warnings cannot be set and always have a "Zero" value.
The "Active during call" parameter cannot be set for will-dependent
pushbutton alarms and warnings!
For a greater understanding of certain parameters, kindly read the
“Background knowledge” section on Page 137.
Parameter
(Further)

Delay time (in seconds): 0 to 255

!! In the case of the Tear-off alarm, the delay time can be
set from 0 to 255 seconds!!

!! In the case of the Position or Man-down alarm, the delay
time can be set from 1 to 255 seconds!!

!! In the case of the Loss alarm, the delay time can be set
from 2 to 255 seconds!!

!! The delay in the event of a time alarm is specified in min-
utes and can be set from 1 to 255!!

Pre-alarm time [in seconds]: 1 to 255

!! !!The delay in the event of a Tear-off alarm can be set
from 0 to 255 seconds!!

!! !!The delay time of the Position or Man-down alarm can
be set from 1 to 255seconds!!

!! The delay time of the Loss and Time-out alarm can be
set from 1 to 255seconds!!

Active during call: Yes / No

The "Active during call = No" setting prevents the triggering
of automatic alarms during a call.
Sub-menu Parameter