Funktel f.airnet D5 Series, Operating Manual, Page: 114 / 160

114
Login / Logout, Sensor test D5 / FC5 Series
Login / Logout, Sensor test
This section describes the login / logout of the Security handset as a personal
emergency signal device and how to perform the function test of the sensors.
There are two login processes for the Security handset:
 Automatic login / logout when the device is removed from the charger and /
or
 Manual login / logout via menu commands on the handset.
Login can be cancelled by using the LEFT SOFTKEY [Cancel]. This soft key
function available if cancellation is permitted.
Automatic Login / Logout
Automatic login of the handset ...
 The handset is in the charger and is switched on.
 Check the battery charge level of the handset. See Page 35. The maximum
operating time can only be achieved with a fully charged battery!
Remove the handset from the charger and perform a sensor test. To do so,
trigger each type of alarm that is indicated on the display.
If you have requested the "Localisation" reception test of an ILB/blue-tooth
identifier for the Guard Control and Localisation feature, you must bring the
handset near to an ILB or blue.tooth-based localisation beacon.
 The handset has been logged in successfully if the the display shows:
Example of requesting a sensor test: Localisa-
tion, push-button alarm, warning, position and
loss alarm
A b b r u c h
S e n s o r t e s t
O r t u n g
D r u c k a l a r m
W a r n u n g
L a g e a l a r m
V e r l u s t a l a r m
Sensor Test
Localisation
Emergency
Warning
Position
Loss
Back