Funktel f.airnet D5 Series, Operating Manual, Page: 110 / 160

110
Signalling D5 / FC5 Series
Aural pre-alarm signalling
Aural pre-alarm signalling on the signalling announces the triggering of an au-
tomatic personal alarm. You can provisionally prevent the impending personal
alarm during pre-alarm signalling. If the alarm conditions persist, a renewed
pre-alarm follows. See “Cancelling pre-alarm signalling on the handset” on
Page 121
Aural signalling of personal alarm and warning
Handset signals the transmission of the alarm or warning to the control centre.
Resetting takes place either via a reset command from the control centre, via
an acknowledgement with a subsequent reset command from the control cen-
tre or locally on the handset. See “Resetting a personal alarm” on Page 122.
Technical fault
Causes of fault:

Battery empty!

Sensor defective
The personal emergency call functions are
no longer available. In the case of a dis-
charged battery, the handset switches off
briefly.

Take care of your personal safety at
your place of work.

Recharge the handset battery immedi-
ately.

Make contact with the control centre
(Technical) Instruc-
tion
Causes:

24 Hour Test
After every 24 hours of continuous opera-
tion, a fresh sensor test is required.

Perform this test!
Symbol (Icon) Display content
(Alarm type) Meaning