Funktel f.airnet D5 Series, Operating Manual, Page: 118 / 160

118
Preparing for use / ending use D5 / FC5 Series
Preparing for use / ending use
Checking the handset for operational readiness (visual inspection)
Check the handset carefully for visible external damage to the housing, an-
tenna, operating and display elements before use. You may only use the Se-
curity handset if no damage is detected and the handset has logged in after a
successful sensor test. At the time of logging in, the handset reacts to all acti-
vated alarm types and supports continuous monitoring by the alarm control
centre.
Note: The tear-off contact should always be plugged in as the handset is
logged into security mode , even if the sensor system of the even if the sensor
system of the tear-off alarm is inactive (deactivated), to avoid triggering an un-
intentional personal pressure alarm.
ATTENTION
Take note of the enclosed Safety note 5008780000.
Logging in the handset as a personal emergency signal device
Log in the handset as a personal emergency signal device, as described in
“Automatic Login/Logout” on Page 114 and “Manual Login/Logout” on
Page 116.
Docking the handset
Immediately after the visual inspection and login, you must securely attach
your Security handset to your clothing by means of its clip or or with the aid of
a carrying case. While affixing the device set, hold it vertically and do not move
it too slowly (position or man-down alarm). If your device, despite all efforts
during fastening, triggers the sounding of a pre-alarm, you can provisionally
cancel the pre-alarm by means of a keystroke on the LEFT SOFTKEY or elim-
inate the the alarm condition by an appropriate change to the attitude and han-
dling (see Page 105) and thus prevent an unintended personal alarm. We
recommend that the device be fastened to clothing by means of a carrying