Fujitsu stylistic lt, Reference Manual

Page: 37 / 132

BIOS Setup 3-17
SUS/RES Switch Disabled
Enabled Determines how the Suspend/Resume button is
configured.
Select Normal to allow Suspend/Resume button to
be used to suspend/resume system operation.
Select Resume Only to allow Suspend/Resume
button to be used only to resume operation from
suspended mode.
Select Power On/Off to configure the Suspend/
Resume button to act as an On/Off switch.
Caution
If the Power On/Off setting is selected, active data
will be lost if the Suspend/Resume button is used to
turn off the system.
Resume On LAN Off
On Determines whether the system will wake up when
the optional internal LAN receives a magic packet in
Suspend mode. If Resume On LAN is On, then LAN
Power During Suspend should also be set to On.
LAN Power During Suspend Off
On Determines whether the LAN power is on during
Suspend mode.
APM CPU Idle Mode Normal
Diagnostic Determines how clocks are managed in Idle mode
when APM software is running. (See “APM CPU Idle
Mode” on page 6-8 for more information.)
LCD Backlight Level Adjustable
Minimum Only Determines whether the display backlight level can
be changed using Brightness hotpads.
Choose Adjustable to allow backlight level to be
changed.
Choose Minimum Only to disable Brightness
hotpads and set the backlight level to minimum at all
times.
Resume on Serial Activity Disabled
Enabled Determines whether the video system resumes
when activity is detected on Serial Port A.
Select Enabled to resume video system operation
when a device (such as a serial mouse) connected to
Serial Port A is active.
Table 3-11. BIOS Setup Power Savings Options Submenu (Continued)
Option Settings Description