Cleaning the Inside of the ScanSnap
442
How to perform cleaning
1.
Clean the following locations:
z
Brake roller
z
Idler roller
z
Glass
z
Pick roller
z
Ultrasonic sensor
1.
Unplug the cables from the ScanSnap.
2.
Pull the ADF release tab to open the ADF top section.
3.
Clean the following locations with a cloth moistened with Cleaner F1.
ATTENTION
z
Do not use water or mild detergent to clean the inside of the ScanSnap.
z
It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with a moderate quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
z
Be careful when cleaning not to catch the cloth in the document detection sensor.
ADF release tab
ADF top section
ADF paper chute
(cover)
Document detection
sensor