manualshive.com logo in svg

Fujitsu PRIMERGY TX1320 M1, Upgrade And Maintenance Manual

Share
Download
Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual Download Page 273

TX1320 M1

Upgrade and Maintenance Manual

273

13

Front panel

This chapter provides information on how to replace the front panel module and 
optional front LAN connector board.

Safety notes

V

CAUTION!

●

When inserting the front panel module into the server, ensure not to 
pinch or strain any connected cables.

●

Circuit boards and soldered parts of internal options are exposed and 
can be damaged by static electricity. Always discharge static build-up 
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)

●

Do not touch the circuitry on boards or soldered parts. Hold circuit 
boards by their metallic areas or edges. 

●

For further information, please refer to chapter 

"Important 

information" on page 31

.

In this chapter

●

"Replacing the front panel module" on page 274

Summary of Contents for PRIMERGY TX1320 M1





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands