Fujitsu PRIMERGY TX1320 M1 Page 101 Upgrade And Maintenance Manual Download

Page: 101 / 340

TX1320 M1

Upgrade and Maintenance Manual

101

Basic software procedures

Under

Network Inventory

, you will find detailed information on each network

controller in the managed PRIMERGY server, including its MAC address.

This information is only available with the iRMC S4 or above.

Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.

Inform the customer about the changed MAC address.

5.2.15.2 Looking up WWN addresses

Emulex FC / FCoE adapters

Enable the network controller’s Option ROM in the system board BIOS as
described in section

"Enabling Option ROM scan" on page 88

Restart the server.

During boot, as soon as the Emulex BIOS utility option appears, press

[ALT]

[E]

[CTRL]

[E]

Under

Emulex Adapters in the System

you will find all available Emulex

adapters and their WWN addresses.

Note down the new 16-digit WWN address.

Press

[Esc]

to exit the Emulex BIOS utility.

Inform the customer about the changed WWN address.

QLogic FC adapters

Enable the network controller’s Option ROM in the system board BIOS as
described in section

"Enabling Option ROM scan" on page 88

Restart the server.

During boot, as soon as the QLogic BIOS utility option appears, press

[ALT]

[Q]

[CTRL]

[Q]

Under

Select Host Adapter

use the arrow keys

to select the desired

FC / FCoE adapter and press

[Enter]

From the

Fast!UTIL Options

menu, select

Configuration Settings

, and press

[Enter]

From the

Configuration Settings

menu, select

Adapter Settings

, and press

[Enter]

Summary of Contents for PRIMERGY TX1320 M1





















































































































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1320 M1

Reviews:

Related manuals for PRIMERGY TX1320 M1

Brands by name

Popular brands

Fujitsu PRIMERGY TX1320 M1, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY TX1320 M1

Reviews:

Related manuals for PRIMERGY TX1320 M1

Brands by name

Popular brands