Fujitsu Primergy TX120 User Manual Download Page 214

Page: 214 / 263

214

Chapter 9 Operation and Maintenance

Remove the ball and rinse it with water.

Flip the mouse over to remove the ball. Afterwards, wash it with water.

Clean the inside of the mouse.

Wipe the inside of the mouse, the roller, and the bottom cover with a damp cloth.

Insert the ball and apply the cover.

After the ball and inside of the mouse are dry, insert the ball and apply the cover.

Optional Devices

For details about cleaning optional devices, refer to "PRIMERGY ServerBooks" supplied with the
server, and "Supplement" supplied with options.

Roller

Summary of Contents for Primergy TX120








































































































































































































































































Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands

Fujitsu Primergy TX120, User Manual

Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands