Fujitsu Primergy TX120 User Manual Download Page 171

Page: 171 / 263

171

PRIMERGY TX120 User’s Guide

Inst
a

llin
g hardw

are option

Notes on Installing Expansion Cards

• Install installable expansion cards only.
• Before installing an expansion card, refer to the manual supplied with the expansion card.

7.4.3 How to Install Expansion Cards

Turn off the server and connected devices, and unplug all power cables from
the outlet.

Remove the side cover.

"7.2 Removing and Attaching the Side Cover" (pg.162)

Touch a metal part of the server to discharge static electricity.

Push the tabs on the slot fixing cover (1) to open to the rear side (2), and
remove the slot cover (3).

Be sure to keep the removed slot cover for later use.
If operating the server with no expansion card, attach the slot cover to keep dust away.

㽴

PUSH

Summary of Contents for Primergy TX120








































































































































































































































































Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands

Fujitsu Primergy TX120, User Manual

Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands