Fujitsu Primergy TX120, User Manual

Page: 120 / 263

120
Chapter 4 Manual OS Installation
3
Click [Reinstall Driver] in the [General] tab window.
The [Welcome to the Hardware Update Wizard] window appears.
4
Check [No, not this time] and click [Next].
5
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
6
Click [Finish].
7
Click [Close] to close the properties window.
8
Remove the driver disk and restart the system.
`
After LAN driver installation, names of the LAN devices are displayed as follows.
4.3.2 Installing the LAN Driver (Windows Server 2003)
The LAN driver installation procedure differs depending on whether the network adapter was
recognized during the OS installation.
„
Updating LAN Drivers
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
1
Click [Start] → [Administrative Tools] → [Computer Manager].
2
Click [Device Manager].
3
Double-click a LAN device name under [Network adapters].
4
Insert the driver disk created from the ServerStart CD-ROM into the server, it is
according to the installed LAN device.
5
Click [Update Driver] in the [Driver] tab window.
The "Welcome to the Hardware Update Wizard" window appears.
table: LAN device name
LAN cards LAN device name
Onboard LAN (1000BASE-T) Broadcom NetXtreme Gigabit Ethernet
PG-1882L Intel(R) PRO/1000 MF Server Adapter
PG-1892L Intel(R) PRO/1000 MT Server Adapter
PG-2861L Intel(R) PRO/1000 PT Dual Port Server Adapter
PG-289L Intel(R) PRO/1000 PT Server Adapter