22
Options Guide
U41599-J-Z156-1-76
Installing SATA Hard Disk Drive
SATA Hard Disk Drives
Ê
Remove the necessary EasyClick rails from the next free bay of the hard disk
drive cage (installation sequence from above downward).
V
CAUTION!
Keep the dummy module for future use. If the drive is removed again
and not replaced with a new drive, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against
fire.
Ê
Unpack the new drive, and make the desired settings. You should read the
accompanying documentation supplied with the drive beforehand.
Figure 10: Attaching the EasyClick rails to the hard disk drive
Ê
Press the EasyClick rails (upper pin row) into the mounting holes of the drive
as shown in figure 10 on page 22. Screws are not necessary, the pins at the
rails engage into the mounting holes of the drive.
I n t e r f a c e
Summary of Contents for PRIMERGY Econel 50
