U41599-J-Z156-1-76
Options Guide
19
Accessible drives
Installing CD/DVD/Tape Drive
V
CAUTION!
Keep the dummy module for future use. If the drive is removed again
and not replaced with a new drive, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against
fire.
Ê
Unpack the new drive, and make the desired settings. You should read the
accompanying documentation supplied with the drive beforehand.
Figure 8: Attaching the rails to the CD/DVD drive
Ê
Press the EasyClick rails into the lower mounting holes of the drive. Screws
are not necessary, the pins at the rails engage into the mounting holes of the
drive.
Ê
Push the assembled drive with the rails into the free bay until the EasyClick
rails are locked in position.
Ê
Connect the cables to the drive as described in the next section.
Ê
Close the server, connect it to the mains, and switch it ON as described in
chapter “Completion” on page 31 and following.
Proceed in the reverse order for removal.
Summary of Contents for PRIMERGY Econel 50
