![background image](http://html.mh-extra.com/html/fujitsu/primergy-econel-50/primergy-econel-50_service-supplement-manual_121056082.webp)
28
Options Guide
U41599-J-Z156-1-76
Installing a Standard PCI controller
Controllers in PCI Slots
Ê
Press the unlocking mechanism (1) in the direction of the arrow and fold out
the locking rail (2). The word „PRESS“ is embossed on the unlocking
mechanism.
Ê
Remove the PCI slot cover (3).
V
CAUTION!
Keep the slot cover for further use. If the controller is removed again
and not replaced with a new controller, the slot cover has to be
reinstalled to comply with applicable EMC regulations and satisfy
cooling requirements and fire protection measures.
Ê
Unpack the new controller, and make the desired settings. You should read
the accompanying documentation supplied with the controller beforehand.
Figure 15: Installing the controller
Ê
Install the controller into the PCI slot (1) and press it carefully into the
associated plug-in location on the system board until it engages properly.
Ê
Fold the locking rail (2) until it engages.
2
1
Summary of Contents for PRIMERGY Econel 50
