Econel 50
Service Supplement
7
3
Safety
I
The following safety notes are also provided in the “Safety” manual.
This device complies with the relevant safety regulations for information
technology.
V
CAUTION!
The actions described in this manual should only be performed by
service personnel.
Before operating the device
V
CAUTION!
●
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
●
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device in its original packaging or in other suitable
packaging which will protect it against shock or impact.
Installation and operation
V
CAUTION!
●
The server automatically sets itself to a voltage in the range of 100 V
to 240 V. Make sure that your local voltage is within this range.
●
This device has a specially approved power cable and must only be
connected to a grounded insulated socket.
●
Ensure that the power socket on the device or the grounded wall
outlet is freely accessible.
●
The power switch or the main power switch does not disconnect the
device from the mains voltage. To disconnect the line voltage
completely, remove the power plug from the grounded insulated
socket.
Summary of Contents for PRIMERGY Econel 50
