![background image](http://html.mh-extra.com/html/fujitsu/primergy-econel-50/primergy-econel-50_service-supplement-manual_121056018.webp)
14
Service Supplement
Econel
50
General Purposes
Replacement Routines
4.1.2
Removing/Mounting the Front Panel
Remove the front panel when making the following replacements:
–
Replacing the operating panel cable
–
Replacing the floppy disk drive
Ê
Remove the left side cover as described in section “Removing/Mounting the
Side Cover” on page 13.
Ê
Detach the two unlocking levers on the side, and fold out the front panel.
Ê
Remove the front panel carefully.
Proceed in the reverse order for mounting.
4.1.3
Removing/Mounting the System Fan
Remove the system fan when making the following replacements:
–
Replacing PCI cards
–
Replacing the system board
Ê
Remove the left side cover as described in section “Removing/Mounting the
Side Cover” on page 13.
Ê
Disconnect the fan cable from the system fan port FAN3 on the system
board (see D1859 sticker).
Ê
Detach the unlocking lever and remove the system fan (see also figure 3 on
page 16).
Proceed in the reverse order for mounting.
4.1.4
Fold out the Power Supply Unit
Fold out the power supply unit when making the following replacements:
–
Replacing the processor and the heat sink
–
Replacing memory modules
–
Replacing the system board
Summary of Contents for PRIMERGY Econel 50
