Fujitsu PRIMERGY BX620 S4, User Manual

Page: 233 / 276

233
PRIMERGY BX620 S4 Server Blade User’s Guide
Floppy disk drive
Cannot read or write to the floppy disk
Prolonged use of the floppy disk drive accumulates dust on the device head (the part which reads/writes
data). A dirty head can impair the ability to read/write data to/from a floppy disk correctly.
Clean the head once every three months.
Cannot write to the floppy disk
• Check to see whether the floppy disk drive is properly connected to the Server Blade.
For more information on the connection procedures, refer to the "Start Guide".
• The write protection of the floppy disk may be applied.
Flip the switch on the disk to allow writing.
CD/DVD drive
Cannot read data
• Check to see whether the CD/DVD drive is properly connected to the Server Blade.
For more information on the connection procedures, refer to the "Start Guide".
• The CD/DVD drive may not properly be recognized on the OS. Check the settings.
For details, refer to the CD/DVD drive manual.
• Check to see whether the CD/DVD is inserted properly. If it is not, correctly insert the CD/DVD so
that the label is facing up.
• Check to see that the CD/DVD is not dirty. If it is dirty, wipe it with a soft, dry cloth.
• Check to see that the CD/DVD is not scratched or bent. If scratched or damaged, replace the CD/
DVD.
The unit does not operate properly
• Check to see whether the cable is connected properly. If it is not, correctly connect the cable.
For more information on the connection procedures, refer to the "Start Guide" and the CD/DVD drive
manual.
SCSI device (internal/external)
The unit does not operate properly
• Check to see whether the SCSI cable is connected properly. If it is not, correctly connect the cable.
• For more details on the internal hard disk unit, refer to "7.7 Installing an Internal Hard Disk Unit"
( pg.197).
• Check that the jumper pins are set correctly. Set them if they are not set correctly.
• Check that the SCSI-ID and terminator are set correctly. Set them if they are not set correctly.