201
PRIMERGY BX620 S4 Server Blade User’s Guide
7.8 BIOS Setting with Expansion
Card Installed
In this Server Blade, the settings of the BIOS Setup Utility must be changed
according to installation conditions when installing the following expansion boards or
cards.
• 4Gbit/s FC I/O Module (PGFCD201)
• 2Gbit/s FC I/O Module (PG-FCD102)
• 1Gbit/s Ethernet I/O Module (PG-LND201)
• Eth. Ctrl 2 x 1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
• SCSI Ctrl U160 lp (PG-1301L)
• SAS RAID Ctrl (PG-248EL)
For a device that starts the OS, use the BIOS Setup Utility to set the optional ROM (OPROM) to
[Enabled].
For more details on the setting procedures, refer to "8.2.5 PCI Configuration Submenu" (
pg.212) in the
[Advanced] menu.
Refer to the "PRIMERGY BX620 S2 Server Blade User's Guide" or "PRIMERGY BX620 S3 Server
Blade User's Guide" when performing 2Gbit/s FC I/O Module (PG-FCD102) settings.
Summary of Contents for PRIMERGY BX620 S4
