Fujitsu PRIMERGY BX620 S4 User Manual Download Page 26

Page: 26 / 276

Chapter 1 Overview

When IIS is not found in the system, ServerView Web-Server is installed even if "ServerView Console

(for IIS)" is selected.

ServerView Console (for Apache) is selected by default. To install ServerView Console (for IIS), select

"RAID Management Tool / ServerView Console (for IIS)".

If "RAID Management Tool / ServerView Console (for IIS)" is selected, ServerView Console (for

Apache) is not installed.

ServerView Console (for IIS) cannot be installed in Quick installation mode.

For Windows Server 2008, ServerView Console (for IIS) cannot be installed.

For Windows Server 2003, it is not possible to release both the ServerView Console (for IIS) and the

ServerView Console (for Apache). However, it is possible for Windows Server 2008.

In Windows Server 2008 Server Core installation environment, ServerView Console (for Apache) is not

supported.

Intel

PROSet will be installed only when an optional LAN card is installed properly and the driver is

applied correctly.

If the OS is installed on other than drive C using ServerStart, Intel

PROSet will not be installed. In this

case, install Intel

PROSet manually. For details, refer to "5.7.1 Intel® PROSet Installation" (

pg.151).

Summary of Contents for PRIMERGY BX620 S4





















































































































































































































































































Search results

Summary of Contents for PRIMERGY BX620 S4

Reviews:

Related manuals for PRIMERGY BX620 S4

Brands by name

Popular brands

Fujitsu PRIMERGY BX620 S4, User Manual

Search results

Summary of Contents for PRIMERGY BX620 S4

Reviews:

Related manuals for PRIMERGY BX620 S4

Brands by name

Popular brands