Fujitsu PRIMERGY BX620 S4, User Manual

Page: 228 / 276

228
Chapter 9 Operation and Maintenance
9.1 Daily Maintenance
This section explains how to perform maintenance during operations.
PRIMERGY information
For the latest information on PRIMERGY, update modules, drivers and the software, refer to the Fujitsu
PRIMERGY website.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
Regarding BIOS and firmware, contact to Fujitsu Support Office. Refer to the following website.
http://www.fujitsu.com/global/contact/computing/PRMRGY_index.html
9.1.1 Checking the Server Condition
Use the status LED and server monitoring tool to check the server status.
Checking each LED
This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For details about the location and function
for each status display LED, refer to "1.3 Component Names and Functions" ( pg.27) and "Chapter 1
Component Names and Functions" in the "BX600 S3 Blade Server System Unit Hardware Guide".
Server Monitoring Tool (ServerView)
ServerView is software that monitors whether the server hardware is in a normal state to protect
important server resources. When using ServerView, the server hardware is monitored all the time. Early
detection of errors is made possible because if an error that could cause trouble is detected, the
administrator is notified in real-time. This allows the server administrator to remove system errors early
and avoid trouble.
For an overview of and details about installation of ServerView and other high reliability tools, refer to
"1.2.2 High Reliability Tools" ( pg.23) and "Chapter 6 High Reliability Tools" ( pg.163).
Check using Management Blade
The Management Blade is equipped with two management interfaces (Web UI and CLI) that enable you
to monitor whether the server hardware is running properly.
For details about the Management Blade, refer to "BX600 Management Blade Hardware Guide".