SVmco User Guide
31
Make settings only as needed.
You can use duplicate disks from a partition in a single cabinet to configure a
new partition. To do so, you need to manually change EngineID of SNMPv3 for
internal SVmco communication.
Change EngineID by using the following procedure. Perform the procedure with
root privileges.
Operations
1.
Execute the ps command to check whether SVmco is active.
Syntax
ps ax | grep mco
Example of output
If the command displays the processes in /opt/fujitsu/SVmco/bin/ as follows,
SVmco is running.
# ps ax | grep mco
4562 ?
S 0:00 /opt/fujitsu/SVmco/bin/pm -o 70 /etc/opt/\
SVmco/global/pmmco.conf
4563 ?
S 0:18 /opt/fujitsu/SVmco/bin/pcx -p /
4564 ?
S 0:06 /opt/fujitsu/SVmco/bin/pcxipmi -p /
4565 ?
S 0:00 /opt/fujitsu/SVmco/bin/mmbm -p /
4566 ?
S 0:01 /opt/fujitsu/SVmco/bin/mmbs -p /
21670 pts/5 S+ 0:00 grep mco
