SVmco User Guidel
38
Required/
As needed
Setting item
Automatic
setting (*1)/
Manual setting
(*2)
See
Setting trap
destinations
Manual
setting
2.2.6 Setting trap
destinations
Setting Watchdog
for monitoring
after a STOP error
(fatal system
error)
Manual
setting
2.2.7 Setting the
Watchdog Timer for
monitoring after a STOP
error (fatal system error)
Installing a SVmco
update
Not applicable
2.2.8 Installing a SVmco
update
As
needed
Uninstalling
SVmco (*3)
Not applicable
2.2.9 Uninstalling
SVmco
*1 Automatic setting: Values are automatically set during SVmco installation.
You may need to change an automatically set value. See the section listed in the
table.
*2 Manual setting: Values are not automatically set during SVmco installation.
Make settings as described in the section referred to in the table.
*3 To operate the PRIMEQUEST 1000x2 series server, you need to first install
SVmco. If you uninstall SVmco, the following restrictions apply.
Even under an REMCS agreement, no software errors are reported.
Hot maintenance of hard disks is disabled. The partition must be
stopped for maintenance.
