Fujitsu PRIMEQUEST 1000 Series User Manual Download Page 648

Page: 648 / 905

SVmco User Guidel

640

5 (Illegal Request): Examine the software.

6 (Unit Attention): This is notification information from various devices. (e.g.,

reset status, RAID degradation if applicable)

7 (Data Protect): Check the Write Protect status.

8 (Blank Check): Check tape and other operations.

b (Aborted Command): Investigate problems in the SCSI bus and FC

transmission paths.

Severity:

Warning

Action:

(R/M/T/S)

14140

sd:sd[a-z]* Device error (Use a kernel compiled with support for large
block devices) vendor=%v model=%m serial-no=%ser

Meaning:

A device error occurred. The disk size is too large.

%v: (Example) FUJITSU

%m: (Example) MAP3367NC

%ser: (Example) 01234567

Corrective action:

If a single drive is used, replace the disk. If an ETERNUS machine is used,
examine it. Alternatively, use a kernel that supports the disk capacity.

Summary of Contents for PRIMEQUEST 1000 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands

Fujitsu PRIMEQUEST 1000 Series, User Manual

Search results

Summary of Contents for PRIMEQUEST 1000 Series

Reviews:

Related manuals for PRIMEQUEST 1000 Series

Brands by name

Popular brands