SVmco User Guide
63
Example: C:\fujitsu\ServerView
Suite\SVmco\etc\fujitsu\SVmco\usr\pnwatchdog.conf
2.
Specify the value of the following key. The default is 0.
Section: [WATCHDOG]
Key: [TIMER]
Setting value (unit: seconds): 0 (Watchdog Timer disabled),
1 to 6000 (Watchdog Timer monitoring time)
Remarks
Determine the setting value by measuring the time taken for a memory dump in
the applicable partition. If the measured time exceeds 6000 seconds (one hour
and 40 minutes), specify 0 (Watchdog Timer disabled).
If the specified time is too short for a memory dump, the Watchdog Timer times
out and triggers a Hard Reset. In such cases, a memory dump cannot normally
be acquired.
2.2.8 Installing a SVmco update
This section describes the SVmco update installation procedure.
Remarks
Using a fix program of the same version as the installed SVmco version:
SVmco uninstallation begins when you click the [Delete] button and click
the [Next] button in the confirmation message dialog box. After that,
