Fujitsu MAA3182SC, Oem Manual

Page: 221 / 250

C141-E039-01EN 4 - 18
Table 4.3 Sense data error classification (2 of 4)
K * C * Q * Outline of Error L *
Recovery Method
(See Table 4.4.)
3 19 xx SA information error Need 7
1C xx SA information error not found
The information recorded in (SA) on the disk
media cannot be read correctly.
3 31 00 Medium format corrupted Need 18
31 01
FORMAT command failed
The data format
The data format on the disk media is not
correct.
4 01 00 No index/sector signal Need 7
02 00 No seek complete
03 xx Peripheral device write fault
32 01 Defect list update failure
These are errors detected in the operation of the
disk drive.
4 15 xx Positioning error Need 12
This is an error of the disk drive's seek system.
4 32 00 No defect spare location available None 19
No usable alternate blocks exist on the disk
drive.
4 40 nn Diagnostic failure on component 'nn' Need 13
An error was detected in the IDD's self-
diagnosis.
4 44 nn Internal target failure Need 20
E0 nn Microprogram detected error
An internal hardware error or a microcode
detection error was detected in the IDD.
4 4C 9x Microcode list error Need 5
The microcode, etc. recorded on the disk media
cannot be read correctly.
4 4C 8x Calibration failed Need 10
C4 xx Drive failure
The initial seek was terminated abnormally.
Or, a serious error was detected in the drive's
control system.
* K: Sense Key C: Sense Code
Q: Sub-sense code L: Logging Necessary? (shown in item 4.2.3)