Fujitsu MAA3182SC, Oem Manual

Page: 214 / 250

C141-E039-01EN 4 - 11
Table 4.2 Sense and subsense codes (6 of 7)
C * Q *
Name Explanation
Sense
key
4C nn Logical unit failed self-
configuration
The IDD's initial setup failed. ('nn' is the Fujitsu unique
code (80 to FF)) 4
4E 00 Overlapped commands
attempted
1) Before execution of an untagged command was
completed, the same INIT issued a new command to
the same LUN.
2) Before execution of a tagged command was
completed, the same INIT issued a command to the
same LUN with the same tag. Or, an untagged
command was issued when not in the sense hold
state.
B
5B 01 Threshold condition
met
The statistical information cumulative value reached the
threshold value. 6
02 Log counter at
maximum
The statistical information cumulative value reached the
maximum value. 6
5C 01 Spindle synchronized The rotational synchronization operation was
completed.
6
02 Spindle not
synchronized.
Rotational synchronization deviated. 6
90 00 Initiator's SCSI ID not
identified
Since the SCSI ID of the INIT was not notified in the
SELECTION phase, the RESERVE, RESERVE
EXTENDED, RELEASE AND RELEASE EXTENDED
commands cannot be executed. 5
98 8x SCSI Bus time out
A time-out was detected on the SCSI Bus.
• 80: A time-out was detected in the DATA OUT
phase.
• 81: A time-out was detected in the DATA IN phase.
• 82: A time-out was detected in the COMMAND
phase.
• 83: A time-out was detected in the STATUS phase.
• 86: A time-out was detected in the MESSAGE OUT
phase.
• 87: A time-out was detected in the MESSAGE IN
phase.
B
* C: Sense Code, Q: Sub-sense Code