Chapter 8 Troubleshooting
109
Quality of scanned text or lines is unsatisfactory.
*1: When scanning in halftone, grayscale or color, the scanned image may
not become sharp and clear. If it can be configured in the scanner
driver's setup dialog box, set the image mode to [Black & White].
Are the glasses and rollers inside the ADF clean?
No
Clean the glasses and rollers inside the ADF.
For details, refer to
"Chapter 6 Daily Care" (page 85)
.
Yes
Is the resolution appropriate?
No
Specify a higher resolution in the scanner driver.
Yes
Is [Black & White] mode selected?
No
Select [Black & White] in the scanner driver. (*1)
Yes
Is there any foreign matter (e.g. dust, paper dust) on the
document?
Yes
Remove any foreign matter off the document.
Such foreign matter on the document may be transferred onto the glasses inside
the ADF and cause the image to become dirty.
No
If the problem persists, check the items in
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service provider.