Chapter 1 Scanner Overview
22
Power saving mode keeps the power consumption low when
the scanner has not been used for a certain period of time.
If the scanner is left powered on for 15 minutes without being
used, it automatically enters power saving mode.
When it enters power saving mode, the Function Number
Display on the operator panel switches off but the [Power]
button remains lit in green.
To resume from power saving mode, perform one of the
following:
z
Load a document in the ADF paper chute
z
Press any button on the operator panel
* Note that pressing the [Power] button for more than two seconds will
turn the power off.
z
Perform scanning from the scanner driver
1.7 Resuming from Power Saving Mode
The waiting time for entering power saving mode can be
changed in the Software Operation Panel.
For details, refer to
"Waiting Time to Enter Power Saving Mode
.
