Chapter 5 Various Ways to Scan
83
Preparation before using this function
Configure the following settings before using this function:
1
Start up ScandAll PRO and select the [Scan] menu
J
[Scanner Setting].
D
The [TWAIN Driver (32)] dialog box appears.
2
Click the [Option] button.
D
The [Option] dialog box appears.
3
Select the [Job/Cache] tab, and select [Check
Overlapping (Ultrasonic)] or [Check overlapping and
length] for [Multifeed Detection] under [ADF Option].
4
Select the [Startup] tab, and then select the [Enable
Scanner Panel] and [Enable [Scan] Button] check boxes.
5
Click the [OK] button.
D
It returns to the [TWAIN Driver (32)] dialog box.
6
In the [TWAIN Driver (32)] dialog box, click the [OK]
button.
D
The settings are saved.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by clicking the [Tool]
menu
J
[Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
