manualshive.com logo in svg

Fujitsu fi-6110, Operator'S Manual

Share
Download
Fujitsu fi-6110 Operator'S Manual Download Page 38

Chapter 3 Configuring the Scan Settings

Appendix

Glossary

Introduction

Index

Contents

TOP

38

How to Load 
Documents

Configuring the 
Scan Settings

Various Ways to 
Scan

Daily Care

Troubleshooting

Operational 
Settings

Replacing the 
Consumables

Scanner 
Overview

How to Use the 
Operator Panel

The TWAIN driver is a driver that conforms to the TWAIN 
standard. It can be used with an application that supports 
TWAIN to perform scanning.
Normally, the scanner driver is launched via an application, 
and then the scan settings are configured in the setup dialog 
box of the driver (some applications may not display the setup 
dialog box).

Settings for TWAIN driver are configured in the above dialog 
box.
The following are descriptions of the main configuration items.
For details, refer to the TWAIN driver Help.

3.1 TWAIN Driver

Ways to launch the scanner driver differ depending on the 
application.
For more details, refer to the manual or the Help files of the 
application.

Summary of Contents for fi-6110













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands