Fujitsu DESKPOWER 2000 FPC-M80000, User Manual, Page: 76 / 79

66
■
Connection of display
If the screen is not centered on the connected display, check if the screen frequency is set in
accordance with the display. In the case that the screen is not centered even though the frequency
is proper, adjust it using the display.
■
Replacement of display
If the display is replaced with a different type (especially with an LCD), a display error such as a
blank screen may occur. In this case, replace the display as follows:
For Windows 98 model
1 Set the resolution to 640 x 480 (the setting before replacement).
2 Set the refresh rate to [Adapter default].
3 Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the
above setting, reinstall the display driver as follows:
1
Start Windows in the Safe mode.
2 Set the graphic adapter to “Standard PCI graphic adapter (VGA)” and restart Windows.
3 Reinstall the display driver.
For Windows NT model
1 Turn the PC off and replace the display.
2 Start the PC with Windows NT Workstation Version 4.00 [VGA mode].
3 Set the resolution, number of colors, and refresh rate in accordance with the display
specifications, and restart the PC.
For Windows 2000 model
1 Set the resolution to 640 x 480 (the setting before replacement).
2 Set the refresh rate to 60Hz.
3 Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the
above setting, reset the display driver as follows:
1
Start Windows in the VGA mode.
2 Set the resolution to 640 X 480.
3 Set the refresh rate to 60Hz.
4 Start Windows.
08Panac(55-71) 01/11/2000, 09:23 66