Fujitsu DESKPOWER 2000 FPC-M80000, User Manual

Page: 26 / 79

16
This section explains how to switch off the power for your PC.
■
Notes on power-off
●
Before turning off the power, terminate all work and save data.
●
Before turning off the power, confirm that the floppy disk and the hard disk access lamps are
off. If the power is turned off while the lamps are on, data being processed may not be saved
or data on the floppy disk or hard disk may be damaged.
●
If [Advanced]-[Power On/Off]-[Power Off Source -Software] of BIOS Setup is set to [Disabled],
the power of the PC unit is not automatically turned off after the OS is shut down.
●
Do not turn off the system during power-on self-test (POST). After the OS completely starts
up, turn off the system by referring to “Turning off the power” below.
●
If the PC becomes inoperable or [Advanced]-[Power On/OFF]-[Power Off Source - Power
Button] of BIOS Setup is set to [Disabled], turn the power off by pressing the power switch for
more than four seconds. In this case, the PC cannot be turned on by other means than the
power switch (ex. via LAN) next time you try to turn it on (other means available afterward).
■
Turning off the power
●
For Windows 98
1 Click the [Start] button, then click [Shut down Windows].
The [Shut down Windows] dialog box appears.
2 Click [Shut down the computer], then click [OK].
The power is turned off.
5 Turning Off the Power
04Panac(14-26) 01/11/2000, 09:22 16