manualshive.com logo in svg

Fujitsu DESKPOWER 2000 FPC-M80000, User Manual, Page: 59 / 79

Share
Download
Fujitsu DESKPOWER 2000 FPC-M80000 User Manual Download Page 59

49

Connect components as follows to the master and slave connectors:

Master

Slave

CD-ROM only

CD-ROM *1

Hard disk only

Hard disk

—

Magneto-optical disk only

Magneto-optical disk

—

Hard disk + CD-ROM

Hard disk

CD-ROM

Hard disk + magneto-optical disk

Hard disk

Magneto-optical disk

Two hard disks

Hard disk

Hard disk

Magneto-optical disk + CD-ROM

Magneto-optical disk

CD-ROM

• When connecting a SCSI-compliant internal option

Connect the connector on the one side of a SCSI card flat cable to the connector of an internal
SCSI option. Connect the connector on the other side to the connector of the SCSI card
installed on the expansion slot.

6

Connect the power cable.

Connect a free power cable to the connector on the installed internal option.
After installing a 3.5-inch floppy disk drive, connect the drive using the power conversion cable

attached to the drive.

7

Reinstall the front panel and the cover.

06Panac(38-50)

01/11/2000, 09:23

49

Summary of Contents for DESKPOWER 2000 FPC-M80000
















































































Reviews:

No comments