Fujitsu DESKPOWER 2000 FPC-M80000, User Manual

Page: 62 / 79

52
1 Problems
This section identifies problems relating to each function.Read wherever applicable.
■
The access lamp stays off.
The PC may be faulty. Contact your nearest Fujitsu Personal Echo Center or the shop where you
purchased the PC.
■
Nothing appears on the display.
Check the following:
●
Is the energy-saving mode set?
Move the mouse or press any key.
●
Is the display cable connected correctly?
●
Is the display cable connected to the outlet?
WARNING
●
Be sure to turn the power off before reconnecting the cable.
Otherwise, an electric shock may occur.
●
Are the brightness and contrast controls of the display adjusted correctly? Adjust the screen
using these controls.
■
The screen sways.
Is there any substance generating a strong electromagnetic field (ex. TV) near the display? If any,
keep it away from the display.
■
The left and right sides of the screen are concealed.
Adjust the horizontal screen size using the adjustment button of the display.
■
Data cannot be written to or read from a floppy disk.
Check the following:
●
Is the floppy disk drive head dirty? If so, use an appropriate cleaning floppy disk to clean the
head.
●
Is the floppy disk write-protected? If so, set the write-protect notch of the floppy disk to the write-
enable position.
■
The PC cannot be turned on or the power lamp does not light up.
Make sure that the power cable is correctly connected to the outlet.
Electric shock
07Panac(51-54) 01/11/2000, 09:23 52