Fujitsu DESKPOWER 2000 FPC-M80000 User Manual Download Page 22

Page: 22 / 79

■

Connecting the power cable

After connecting the display and other peripheral devices, connect the power cable of the PC
unit. Note the following:

●

Do not connect or disconnect the plug with wet hands.

●

Do not damage or modify the power cable.

●

Do not compress, pull, bend, twist, or heat the power cable.

●

Do not use the power cable if it or the plug is damaged or connection to the outlet is not secure.

●

If there is dust on the electrodes of the plug or slots in the outlet, wipe it off with a dry cloth.

Point

- Do not include the power cable in a star-burst connection. Do not entangle the power cable with

the keyboard or mouse cable.

●

In the event of lightning, disconnect the power cable from the outlet.

●

When connecting the power cable to a two-pin outlet, use the adapter plug supplied with the
power cable to connect the grounding wire.

●

When disconnecting the power cable, pull on the plug (not the cable).

●

Fully insert the cable plug in the outlet.

●

If the PC is not to be used for an extended time, disconnect the power cable from the outlet.

03Panac(01-13)

01/11/2000, 09:22

Summary of Contents for DESKPOWER 2000 FPC-M80000
















































































Search results

Summary of Contents for DESKPOWER 2000 FPC-M80000

Reviews:

Related manuals for DESKPOWER 2000 FPC-M80000

Brands by name

Popular brands

Fujitsu DESKPOWER 2000 FPC-M80000, User Manual

Search results

Summary of Contents for DESKPOWER 2000 FPC-M80000

Reviews:

Related manuals for DESKPOWER 2000 FPC-M80000

Brands by name

Popular brands