Fujitsu Aviamo P37FT05AUB User Manual Download Page 57

Page: 57 / 61

E-57

Engl

ish

Deut

sch

Espa

ñol

Fra

lia

Portugu

ᣣ

ᧄ

⺆

Póññ

êèé

፩ၭ

OPTIONS

Desktop Stand unit

P-TT5000 (for 50” model)

P-TT6500 (for 65” model)

Swivel (Revolving stand)

P-TT3700 (for 37” model)

Speaker

(1 set of 2 speakers)

P-SP2000 (for attaching to the display , for
50” / 65” model)

Warning

To prevent injury, fire, and electric shock, we recommend that the display be professionally installed.

CAUTION

This display (P37FT05AUB) is for use only with Fujitsu General Limited’s option (P-TT3700).

This display (P50FT00AUB) is for use only with Fujitsu General Limited’s options (P-TT5000).

This display (P65FT00AUB) is for use only with Fujitsu General Limited’s options (P-TT6500).

Using this display with other option can cause instability resulting in possible injury.

* The speakers can be also used

mounting on the optional "Desktop
Stand unit (P-TT5000/ P-TT6500
type)".

Note

• When mounting the display newly, it is important to ensure that all installation requirements for that mounting option are met. Refer to the

corresponding Installation Manual.

• Please note that the color of options are not matched the color of display perfectly.

• To improve the function and performance of optional accessories, the specifications and part names of the optional accessories may change. Consult

your local dealer before purchasing.

Summary of Contents for Aviamo P37FT05AUB






























































Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands

Fujitsu Aviamo P37FT05AUB, User Manual

Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands