Fujitsu Aviamo P37FT05AUB User Manual Download Page 20

Page: 20 / 61

E-20

WATCHING TV, VIDEO, RGB AND IEEE1394 MODE

Select the TV mode to watch TV programs.

Press

Terrestrial TV programs or cable TV programs are
available. The last program No. that you watched is
received.

Press

to watch terrestrial

programs. Press

to watch

cable TV programs.

Select a desired Program No.

There are two methods to select a Program No.

㨯

Using

, or

㨯

Using

* For more information, see P. E-14 "BASIC

CONNECTION AND PREPARATION OF THE
SYSTEM".

The program can be toggled back to a previous channel,
video input or RGB input.

Press

The program reverts to the channel viewed immediately
before the present channel. If the previous content was
from another video input, the video mode reverts to that
input.

Terrestrial or cable TV broadcastings can be selected.

Press

The ANTENNA signal is selected.

Press

The CABLE signal is selected.

Select the video mode to watch pictures through video
inputs.

Press

Each time this button is pressed, the video input mode is
switched to the next one. The video input mode can
also be switched directly by pressing

and then

the number button on the remote control.

࡮

VIDEO1: Video

࡮

VIDEO2: S-video

࡮

VIDEO3: Component video

࡮

VIDEO4: Component video

࡮

VIDEO5: HDMI

࡮

VIDEO6: HDMI

* For the settings of input terminals, see "EXAMPLE

OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-18) and "Audio Input" (P. E-38).

Select the RGB mode to watch pictures through the
RGB input.

Press

The RGB input mode is selected.
* For the settings of input terminals, see "EXAMPLE

OF CONNECTING EXTERNAL EQUIPMENT"
(P. E-18), "Selecting the settings of D-SUB Input
terminal" (P. E-34), and "Audio Input" (P. E-38).

The connected devices can be controlled from the
display. (Control may be impossible, depending on the
device.)

Press

The devices connected to the 1394 terminals are
displayed on the screen.

Select each device, and press

* For more information, see P. E-43 "IEEE1394

SETTING".

CH RETURN

ANTENNA/CABLE

VIDEO

RGB

Link 1394 (IEEE1394)

• Auto Lock is provided for parents to determine that TV programs and video pictures not good for their children are blocked.

• Restrictions on the watching of TV programs can be placed by channel, age, and program category.

• For details, see "Auto Lock (Parental Lock) Setting" on P. E-36.

About Auto Lock (Parental Lock)

Summary of Contents for Aviamo P37FT05AUB






























































Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands

Fujitsu Aviamo P37FT05AUB, User Manual

Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands