Fujitsu Aviamo P37FT05AUB User Manual Download Page 36

Page: 36 / 61

E-36

OTHER SETTINGS (FEATURES MENU) (Continued)

Auto Lock is provided for the parents to determine that TV
programs and video pictures not good for their children are
blocked.

Restrictions on the watching of TV programs can be placed by
channel, age, and program category.

Sets MPAA system and TV RATING system program viewing
restriction at the television channel and video input.

Select Parental Ctrl By Level by

and press

Enter the Password.

(initial value: "

Placing restrictions on the watching of TV programs by
channel or age.

Press

, or

to select a target item.

Press

to switch between blocking and unblocking.

Description of MPAA chart symbols

Description of TV RATING symbols

Auto Lock (Parental Lock) SETTING

Parental Ctrl By Level

"Auto Lock" Screen

“Enter Password” Screen

NONE

MPAA chart Lock are all cleared.

For the general audience of all ages

Parental guidance suggested. Some
programs are not good for children.

PG-13

Some programs are not good for children at
age 13 years or younger.

Parents' permission required for children at
age 17 years or younger

NC-17

Not for children at age 17 years or younger

For adults only

NONE

TV RATING chart Lock are all cleared.

TV-Y

For children of all ages

TV-Y7

For children of at age 7 years or older

TV-G

For general audience

TV-PG

Parents' permission is required.

TV-14

Firm warning to parents

Program parents would find unsuitable for
children under 14 years of age.

TV-MA

For adults only

Fantasy Violence

Adult Language

Sexual situations

Violence

Suggestive Dialogue

Note
About Auto Lock (Parental Lock)

• Auto Lock can be set for TV and video inputs by age and program category.

• The Auto Lock system of the display is compatible with both TV Rating system and MPAA system.

• The Auto Lock system is available for both analog TV broadcastings and digital TV broadcastings.

• Once Auto Lock is set, the display does not show the restricted program (neither pictures nor audio) when receiving it.

• When receiving a program for which Auto Lock is set, the display shows the "Program Blocked" screen. To show the program, enter the password.

All the settings for Auto Lock are reset temporarily when the password is entered. To enable Auto Lock, turn off the power (STANDBY), and then
turn it ON again. Also, when

or other operation is performed, or the power is turned on/off, while the "Program Blocked" screen is displayed,

the screen may become blank. Also, when

or other operation is performed, or the power is turned on/off, while the "Program Blocked" screen is

displayed, the screen may become blank. In this case, reselect the program you want to watch by pressing

• The Auto Lock system is available only for TV broadcastings and video signals (Video mode, S-Video mode and Comp.video(480i) mode) that are

based on the parental lock standard. The Auto Lock feature will work only when a program rating is available.

• This function does not work in VIDEO5,6 (HDMI).

Summary of Contents for Aviamo P37FT05AUB






























































Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands

Fujitsu Aviamo P37FT05AUB, User Manual

Search results

Summary of Contents for Aviamo P37FT05AUB

Reviews:

Related manuals for Aviamo P37FT05AUB

Brands by name

Popular brands